It is used for the welding of plate material by the brush method. The welding machine is designed for long-term workshop use and the welding cycle is performed automatically. All settings are very simple and do not require great handling or time. The machine is built on the basis of long-term experience and meets the common and demanding requirements for functionality. For table operation, you need to have your own air source not included in the delivery. This air source should be able to supply 1m3 / hr at a pressure of 0.6 MPa. The electrical connection is 3 × 400 V. The electrical switchboard is a part of the table and all the controls are located on it. Temperature monitoring and timing are provided by Omron microprocessor controllers. Pneumatic control is under the table top and it is possible to adjust the pressure in the table feed rollers, the pressure in the pressure clamps, the feed rate and the feed rate of the welding bar.

Technical Data

Thickness of the weld. mat.	3 – 15 mm
Weight	390 Kg
Size	1000 x 800 x 2400 mm
Voltage/Power consumption	230V /50 Hz /3000W
Maximum length of the weld	2 050 mm
Required working pressure	1m3/h při tlaku 0,6 MPa
Length of the cable	15 m